Yoga Mats — In-house TPE and NBR Production Lines
A yoga mat is defined by four things: the material, its thickness, its surface texture and its grip when wet. Our own lines cover both TPE and NBR — an 8,793 m² NBR workshop, and TPE capacity spread across several workshops at roughly three times that footprint. Thickness, sizing, surface texture and printing are all handled in-house. We produce TPE and NBR only — no PVC or natural rubber mats.
Product photos
Photographed from standard production. Colours are matched to your colour card; texture and thickness are listed in the specification table above.






Available materials
- TPE (thermoplastic elastomer)
- NBR (nitrile rubber foam)
Sizes, weights and carton packing
Standard specifications. Weights are per-mat ranges; carton sizes are actual outer-box dimensions.
| Product | Size (cm) | Weight / pc | Pcs per carton | Carton (cm) |
|---|---|---|---|---|
| NBR yoga mat | 183×61×0.8 | 500±50 g | 10 | 76×30×63.5 |
| NBR yoga mat | 183×61×0.8 | 500±50 g | 12 | 62×47×63.5 |
| NBR yoga mat | 183×61×1.0 | 625±50 g | 10 | 83×33×63.5 |
| NBR yoga mat | 183×61×1.5 | 940±100 g | 10 | 98×40×63.5 |
| NBR yoga mat | 185×80×1.0 | 830±100 g | 10 | 83×33×82 |
| NBR yoga mat | 185×80×1.5 | 1245±100 g | 10 | 98×40×82 |
| TPE single-colour | 183×61×0.6 | 680±100 g | 12 | 51×39×63 |
| TPE single-colour | 183×61×0.8 | 900±100 g | 12 | 58×44×63 |
| TPE single-colour | 185×80×0.6 | 800±100 g | 12 | 51×39×83 |
| TPE single-colour | 185×80×0.8 | 1100±100 g | 12 | 58×44×83 |
| TPE dual-colour | 183×61×0.6 | 680±100 g | 12 | 51×39×63 |
| TPE dual-colour | 183×61×0.8 | 900±100 g | 12 | 58×44×63 |
| TPE dual-colour | 185×80×0.6 | 800±100 g | 12 | 51×39×83 |
| TPE dual-colour | 185×80×0.8 | 1100±100 g | 12 | 58×44×83 |
Why the lighter mat can cost more to ship
Freight behaves counter-intuitively too. A carton of 183×61×1.0cm NBR measures 0.174 CBM for 10 pcs — about 0.0174 CBM per mat. Under LCL charging at 1 CBM = 1 tonne, that mat is billed at roughly 17.4 kg against an actual 0.625 kg. NBR's freight penalty comes almost entirely from volume. At the same footprint, the 0.8cm TPE packs 12 to a 58×44×63 carton, billing about 13.4 kg — cheaper to ship per piece. The two 0.8cm cartons also differ per piece: 76×30×63.5 holds 10 mats at about 0.0145 CBM each, while 62×47×63.5 holds 12 at about 0.0154 CBM each — the smaller carton ships slightly cheaper.
NBR shrinkage: why a nominal 183×61 mat can arrive smaller
NBR foam shrinks. That is a property of the material, not a production defect. We foam in a 195 × 63 cm mould and let it shrink down to roughly 183 × 61 cm — those extra 12 cm of length are the allowance reserved for shrinkage.
The catch is that shrinkage is neither a one-off event nor a fixed amount:
- Shipped within one month of production: the mat is guaranteed at 183 × 61 cm or larger.
- Longer storage: shrinkage continues, and the mat keeps getting smaller.
- Cold weather accelerates it: winter production and cold-climate routes shrink more than room temperature.
The worst case combines all three: stock sits in a warehouse for months, ships out in winter, and the buyer opens the carton at the destination to find a mat measurably under the nominal 183 × 61 cm. That is not a supplier cutting corners — it is what NBR shrinkage does when time and low temperature stack up.
How buyers manage it
- Ask for the production date, not just whether stock is available. Older stock quotes cheaper, but the size risk is yours.
- For winter orders or long sea routes, specify a slightly larger size so the shrinkage allowance is thicker.
- Agree the inspection basis in the contract: is the size measured at the factory or on arrival, and what tolerance applies.
- Distribute soon after arrival rather than holding the goods in storage.
We publish this on the product page because it will come up at your incoming inspection sooner or later. Knowing it in advance is much cheaper than discovering it at the destination port.
Customisation and tolerances
Ranges below are typical. Non-standard sizes and thicknesses require tooling confirmation and a higher MOQ.
| Common size | 183 × 61 cm and 185 × 80 cm, cut to order |
|---|---|
| NBR shrinkage and size guarantee | NBR is foamed in a 195 × 63 cm mould and shrinks down to nominal size. Mats shipped within one month of production are guaranteed at 183 × 61 cm or larger; longer storage and low temperatures shrink them further — see the note below |
| Common thickness | 4 / 6 / 8 / 10 / 15 mm |
| Surface | Embossed, smooth, dual-colour, grip texture |
| Weight per mat | NBR 500–1,245 g; TPE 680–1,100 g, depending on size |
| Accessories | Carry strap, carry bag, mesh bag |
| Printing | Screen print, heat transfer, laser logo, custom colour box |
Buyer questions
TPE or NBR — which should I choose?
Two variables decide it: target retail price and shipping mode. TPE is low-odour and resilient, and because it is denser than NBR, 6 mm already gives usable support — it can be made thinner and rolls smaller, which suits mid-to-high-end retail and cross-border e-commerce. NBR is thicker, softer and cheaper, lighter per unit thickness but bulkier and slower to roll, typical for beginner mats. Note that NBR's advantage is unit price, not freight — its volume costs more when sea freight is billed by CBM. Our own lines run TPE and NBR only; we do not produce PVC or natural rubber mats.
Can I customise size and thickness?
Yes. Non-standard sizes and thicknesses usually require new tooling or a production-line change, so confirm MOQ before locking the specification.
Do NBR mats shrink, and what if the delivered size is under nominal?
Yes — it is a property of NBR foam. We foam in a 195×63cm mould and let it shrink to roughly 183×61cm; mats shipped within one month of production are guaranteed at 183×61cm or larger. But long storage plus a winter shipment can stack up, and the measured size on arrival may come in under nominal. Four ways to manage it: confirm the production date before ordering; specify a slightly larger size for winter or long sea routes; write the inspection basis and tolerance into the contract (factory or arrival measurement); and distribute soon after arrival instead of holding stock.
Can you print our logo and use our packaging?
Yes — screen print, heat transfer, laser marking and custom colour boxes. Send vector artwork and packaging files; a confirmation sample is produced before mass production.
Browse stock, then talk customisation
Our 1688 storefront lists live specifications and wholesale tiers. Mention your use case and volume for an accurate quote.